|
|
|
|
|
|
 |
 |
 |
|
 |
|
|
|
|
|
The WW-1 is a classic guitar wah pedal with a few twists. Tonally, you can optimize the performance of the wah effect for clean/crunch and high-gain amplifier settings. Settings include: BASS (Low & High) changes the low frequency response, DEEP (Low & High) changes the effect intensity, Q-FACTOR (Low & High) changes the resonance response, and VOLUME (flat & +3.5 dB gain) optimizes signal levels. Noise-free opto treadle, and rugged metal construction round out the features.
|
|
Top of the line Wowee Wah features midi control over essential parameters (Bass, Deep, Q Factor, Volume Level) allowing guitarists to create unique wah effects for different songs, guitars, effect groupings, etc. - all instantly recalled via MIDI control change sent by the user's MIDI foot controller.
|
|
The BWW-1 is a classic bass wah pedal with a few twists. Tonally, you can choose the focus of the wah effect (lows or high frequencies), the width of the effect (narrow Q or wide Q), with a selectable gain switch for optimized performance with a multitude of bass instruments. Selectable switched on/off or touch-sensitive operation, noise-free opto treadle, and rugged metal construction round out the features. Operates on 9V internal/external power.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
The TBWP True Bypass Wah-Pad is a fully analog device that makes the use of foot-controllable effects more versatile. Pressure from your foot engages the connected effects device(s) instantaneously without the need to "snap" switches on and off. When no pressure is applied, the unit delivers True Bypass operation. Switching is musical and smooth. Creatively control rhythmic "impulses" of sound with the TBWP!
|
|
The DVO Dual Vintage Overdrive is a footswitchable two-channel analog preamp for guitar applications. Versatile DIP switch functionality dictates how the unit operates among 4 modes: CLEAN, CHANNEL 1, CHANNEL 2, SOLO (or BYPASS). It is recommended to connect DVO to a power amplifier (if the amp has effect loop then connect to RETURN jack).
|
|
The DR-3 Dual Reverb is a professional digital reverb pedal with clickless True Bypass and analog EQ circuitry designed especially for guitarists. Choose between two sets (A and B) of the reverb time and intensity. Smooth ON/OFF switching means the unit will naturally fade reverb tails of previously played tones.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
The SD-1 Smooth Delay is a classic digital delay with clickless True Bypass and analog EQ circuitry designed especially for guitarists. The SMOOTH function enable SD-1 emulate the effect of classic analog and tape echoes by reducing the high frequencies each subsequent repeat. Backlit foot knobs and TAP TEMPO function enable easy control on the stage. The unit features two modes of SWITCHING OFF the effect (HARD mode ends repeats, SOFT mode allows full decay of previously played tones). The SD-1 can be also controlled via MIDI.
Advanced Feature: When connecting the "Control" jack and used in conjunction with the DR-3 Dual Reverb, it is possible to toggle reverb settings along with the delay pedal.
|
|
The SA-1 Signal Adapter provides control over level matching effects devices with effects loops of guitar amplifiers. Gone are the distortions, noise and level mismatches of old. The unit is rackmountable via optional hardware (GLAB 1U RMS FRONT PANEL).
|
|
|
|
|
|
|
|
